U.S. OG Six-Five
Brands: Unknown Suppressors
about:
Experience exceptional sound suppression without the weight penalty. Built from a single piece of Grade 23 titanium using advanced 3D printing technology, this suppressor delivers maximum performance with minimal impact on your rifle’s handling characteristics.
FREE SHIPPING OVER $100
FIND AN FFL DEALER
* All NFA Regulations apply.
$999.00
How TAG Layaway Works:
Make a 25% non-refundable deposit, with the remaining due in 60 days. No pre-payment penalties, no interest, and no additional fees.
The OG makes rifles quiet and sound better. For most suppressors, bore size does not have a noticeable effect on suppression levels when a smaller caliber bullet is shot through it. But US found that their 6.5 mm OG performed better than the .30 Caliber version on 6.5 mm and smaller cartridges. Turns out that, for reflex suppressors, matching the bore size to the caliber has quite the effect on sound suppression!
Designed to bring the sound suppression and over-the-barrel tech to 6.5 mm cartridges, the OG Six-Five does so in a lighter fashion.
Sound Specs – Measures 129.5 dBA at the shooter’s ear, shot out of a 24-inch 6.5 Creedmoor firing Hornady 140 ELDM ammunition.
Firing Schedule – Titanium can be subject to strength loss at high heat. It is recommended to keep your titanium suppressor below 800 degrees.
There are no barrel restrictions for standard bolt face cartridges. For short action magnum, 16 inches or longer is recommended. For long action magnum, at least 18 inches.
SPECS
- 5 mm bore
- 5 dBA at the ear
- Printed from Grade 23 Titanium
- One solid piece of material
- 8” long by 1.55” wide.
- 4 ounces
- 4” around the barrel, 4” in front of the muzzle
- Up to .750” diameter barrels (tapers to 0.830 inches at bottom)
- 5/8-24 direct threads (1/2-28 adapter available)
Top Products
EMBRACE YOUR
WILD SIDE
